fusion splicer FSM-60S manufacturer from China Beijing OuFu OE Tech Co., Ltd

Place of Origin:

Beijing, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: FSM-60S

Brand Name: OF

The FSM-60S fusion splicer sets the standard for core alignment fusion splicing by incorporating a user-friendly interface.

The FSM-60S fusion splicer sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable fusion splicer in the market today. The new rugged construction adds improved reliability by resisting shock, dust, and rain, and can withstand a 30" drop test
The FSM-60S splices a fiber in 9 seconds and heats a 60mm splice sleeve in 30 seconds, for a total cycle time of only 39 seconds. New features, such as automatic tube heater operation, user-selectable clamping method (sheath clamp or fiber holder system), automated monitor image orientation, and battery charge capability during splicer operation provide the end user a productivity tool they can count on.New software included provides the ability to download splice data to a PC for splice data reporting, download splicer operating software via the internet to maintain peak performance, and download video images from the splicer to enhance technical support.

Specifications

Applicable type of fibers	SM (ITU-T G.652) MM (ITU-T G.651 DS (ITU-T G.653) NZDS (ITU-T G.655)
Fiber Count	Single
Applicable fiber dimensions	Cladding Diameter: 80 to 150µm. Coating diameter: 100 to 1000µm
Fiber setting and cleaved length	Sheathe clamp A (standard): For coating dia. up to 250µm (8 to 16mm cleave), coating dia. of over 250µm (16µm cleave) Sheathe clamp B (option): For coating dia. up to 1000µm (8 to 16mm cleave) Sheathe clamp C (option): For 900µm dia. loose tube fiber (8 to 16mm cleave) Fiber holder (option): FH-60-250 and FH-60-900 (10mm cleave)
Splicing modes	Total 100 modes
Typical splice loss	0.02dB with SM 0.01dB with MM 0.04dB with DS 0.04dB with NZDS (Measured by cut-back method relevant to ITU-T standard)
Return loss	>>60dB
Splicing time	Typical 9 sec. with SM FAST 10 sec. with SM AUTO 13 sec. with AUTO modes with standard SM (ITU-T G.652)
Arc Calibration Method	Automatic Real-time and by using results of previous splice when in AUTO mode Manual arc calibration function available
Splice Loss Estimate	Available
Attenuation splice function	Intentional high splice loss of 0.1dB to 15dB (0.1dB step) can be made for an in-line fixed attenuator.
Tube heater / heating time	Built-in tube heater with 30 heating modes / Typical 30 sec. with Fujikura FP-03
Applicable protection sleeve	60mm 40mm and Fujikura FPS01 series
Storage of splice result	the last 2000 results to be stored in the internal memory
Tension test	1.96 to 2.25N
Operating condition	0 to 5,000m above seal level, 0 to 95%RH and -10 to 50ºC and up to 15m/s wind velocity, respectively
Storage Condition	0 to 95%RH and -40 to 80ºC respectively. Battery: -20 to 30º for long term
Dimensions	136Wx161Dx143H (mm) excluding rubber foot
Weight	2.3kg with AC adaptor ADC-13 2.7kg with battery BTR-08.
Viewing method and display	Two CMOS cameras and 4.1" color LCD monitor
Fiber view and magnification	X/Y (300X magnification), or both X and Y simultaneously (187X magnification)
Power Supply	Applicable voltage from 100 to 240V AC or 10 to 15V DC with ADC-13. 13.2V DC with BTR-08
No. of splice cycles with battery	Typical 160 cycles (splice / tube heat) with BTR-08
Electrode Life	2500 arc-discharges
Terminals	USB 1.1 (Mini-B type) connector for PC communication. 6-pin Mini-DIN connector for HJS-02, HJS-03 or SH-8C power supply